Open Jobs

Commercial sheet metal work in Columbus, OH.Job Responsibilities:installing rectangular and spiral ductworkVAV boxesDampersDiffusersAir devicessetting rooftop unitsthe ability to read blueprints and handle layout and installation independentlySchedule: Monday-Saturday 50 hours a week.Project Duration: Work to go through April 2027.

Long-term industrial project in Santa Teresa, NM.Per Diem: $185/day all 7 days ($1,295/week).Project Note: Candidates must currently hold an active New Mexico Journeyman Pipefitter Card (JPF).Job Details:Working with 8", 18", and 24" carbon steel pipeSchedule: Monday-Saturday, 7:00 AM - 7:30 PM (60 hours per week)

Long term project in the Ellendale, ND area.Sign-on Bonus: $2,500Per Diem: $125/day OR Lodging + $50/day.Schedule: Monday-Friday, 6:00 AM - 6:00 PM, 68-80 hours per week.Start Date: ASAP.Duration: 1-2 years.Position Summary: Licensed Journeyman Electricians are needed for a long term project with overtime opportunities.

Immediate start in Oxnard, CA.Schedule: Monday-Saturday, 7:00 AM - 5:30 PM.Start Date: June 8, 2026.Duration: 2+ Weeks - more travel projects to follow.Journeyman Electrician Job Description:Experienced Journeyman Electricians will perform electrical work on a conveyor system within a manufacturing environment specializing in enamel and painting operations. Electricians will primarily be responsible for reading electrical schematics, performing terminations, and connecting electrical components throughout the conveyor system. Most wiring is routed through cable basket systems, resulting in minimal conduit installation. An on-site engineer will be available to provide direction and support as needed.

Work Schedule: 68+ total weekly hours. Shifts will be five+ 12-hour workdays and an 8-hour workday on Saturday. Workdays will be Monday-Friday; 6:00 am-6:00 pm. Start Date: ASAP. Duration: 1-2 years.Qualifications for Journeyman Electrician:North Dakota Journeyman Electrical License required OR licensed in a reciprocating state with ability to reciprocate in ND: Alaska, Arkansas, Colorado, Idaho, Iowa, Maine, Montana, Nebraska, New Hampshire, Utah, Wyoming.Position requires the use of PPE, including: Steel-Toe work boots, safety vest, hard hat, safety glasses, and glovesMust have standard electrical hand tools.Pre-employment drug and background screening required

Traveling HVAC Startup Controls ForemanLocation: Remote - United StatesThe Traveling HVAC Startup Controls Foreman leads the commissioning, startup, and troubleshooting of commercial and industrial HVAC and control systems nationwide. This role ensures systems are installed and operating correctly, provides field leadership to technicians, and collaborates with project teams to deliver high-quality, safe project execution.Key ResponsibilitiesCommission and start up HVAC equipment, refrigeration systems, controls, and heat pumps.Troubleshoot and repair commercial/industrial HVAC and control systems.Install and pressure-test refrigeration piping.Complete all startup and service documentation accurately.Coordinate work with other trades and maintain project schedules.Lead, train, and support apprentices and technicians.Maintain a safe, clean, and organized job site.Communicate professionally with clients and project leadership.

Job Summary:Traveling JW Electricians with any valid state licenses, or documented proof of 12,000 Hours Required.Work Week: Monday-Saturday 10 Hours per Day=60 Hours/Week1st ShiftWeekly Compensation Breakdown40 Regular Hours: $1,792.0020 Overtime Hours (1.5x): $1,344.00Per Diem (6 days x $100/day): $600.00Incentive Pay ($500 weekday + $150 weekend): $650.00Total Weekly Gross: $4,386.00Day in the LifeInstall, inspect, and maintain electrical systems, wiring, fixtures, and equipment according to local and national electrical codes. Troubleshoot and repair electrical malfunctions or equipment failures on-site. Read and interpret blueprints, wiring diagrams, and technical drawings. Must be able to bend and install pipe. Proficient in bending conduit. Plan layout and installation of electrical systems for construction or renovation projects. Perform preventive maintenance and safety inspections on electrical components and systems. Test electrical systems using specialized tools (voltmeters, oscilloscopes, ammeters, etc.). Collaborate with project managers, engineers, and clients to ensure timely and accurate work completion. Document all work performed, including repairs, replacements, and system updates. Adhere to all relevant safety procedures and industry regulations. Provide field reports and recommendations for system improvements or upgrades.

Project Type: UPS generator shutdowns and replacements at Walmart locationsTravel Requirement: Full-time travel, long-term deployment (2 weeks to 6 months+)Position OverviewCommercial licensed traveling electricians to support critical power projects involving UPS shutdowns, generator swaps, and electrical upgrades at Walmart facilities nationwide. This role requires true road-warrior availability. Electricians will remain deployed continuously until the project is complete, whether that is two weeks or six months. There is no set rotation schedule and no guaranteed time home. Candidates must be fully comfortable with extended travel and working wherever needed. Most assignments will involve working with a team of 2-3 electricians, and they are open to deploying established teams if all members meet qualifications.Primary DutiesUPS, rackhouse, and cooler electrical workConduit installation: primarily 3/4"-4" EMT, with some rigid conduitWire pulling2-4 inch pull fieldsTerminationsUPS installation and troubleshootingControls experience (industrial controls/automation)

TRAVELING CONSTRUCTION LABORERFull-Time | Nationwide Travel RequiredWe have a niche market for doing navigational aid work for the FAA across the country. A good portion of our work is performed in the central, western and southern part of the country.This is a traveling position. You will be moving from project to project with our crew.Travel is consistent throughout the yearHours: 40/week (4-10's)You MUST be able to pass a federal background checkTraveling Construction Laborers:Assist with general construction tasksLoad/unload materialsMaintain clean and safe job siteSupport skilled trades as neededAdheres to all company, local, state, and federal safety standards and regulationsEnsure daily work flow and schedulesUnderstand project specs and drawings to ensure quality controlWork hands-on alongside crew and follow instructionsWhat We're Looking ForWillingness to travel extensively is a must. Reliable and shows up ready to work. Basic construction knowledge is preferred, along with basic hand tools for use on construction sites. Specialty tools will be provided by the company. Must be able to adapt to different job sites, projects and locations, and have a valid driver's license and reliable transportation.Bonus if you have:Some experience across multiple tradesPrevious traveling construction experienceThe ability to follow directions and lead when needed

Travel Pay: $180/week in & out | Mileage: $0.70/mile | Travel and lodging expenses coveredGeneral Purpose: Install and repair equipment and machinery in industrial establishments. Requires 100% travel and a valid driver's license.Essential Duties and ResponsibilitiesFit bearings, align gears and tires, and attach motors.Use hoists, pulleys, jacks, and come-a-longs to perform tasks.Install, repair, replace, and dismantle machinery according to blueprint specifications.Act as signal person for crane operators to ensure continuity of worksite safety.Perform FCAW (dual shield) and SMAW (stick) welding per AWS D1.1 Structural code.Use oxy/acetylene cutting to trim metal objects to specific dimensions.Conduct carbon arc gouging for crack repair and full penetration weld preparation.Transport equipment and materials using a forklift and/or manlift.Work EnvironmentRegular exposure to outside weather conditions, moving mechanical parts, and loud noise levels. Frequent walking and standing; occasional climbing required. Must be able to lift and/or move up to 50 pounds.BenefitsMedical & Dental InsuranceVision CoverageSTD/LTD401(k) Plan and Roth IRASupplemental Life & AD&D

Basic Purpose and Function: Shipyard new construction of inland and ocean-going barges using 1/16" flux-cored wire.ResponsibilitiesPerform FCAW welding on carbon steel plate.Weld vertical up and overhead on barge structures.Follow WPS, blueprints, and shipyard weld symbols.Ensure weld quality and comply with shipyard standards.

HIRING ELECTRICIANS - MULTIPLE STATESWe’re hiring electricians for projects across the country with multiple contractors!Now Hiring In:WyomingIowaArizonaGeorgiaIndianaComing Soon:TexasNew Mexico

Traveling Journeyman ElectricianTravel projects nationwide with steady long-term work and overtime potential.Job HighlightsInstall and service commercial/industrial electrical systems.Read and interpret blueprints, one-lines, and schematics.Run and bend conduit, pull and terminate wire.Install generators, UPS systems, and industrial controls (PLCs).Operate lifts as needed and maintain safe practices on every site.

Essential Duties and ResponsibilitiesWork with mechanical teams on industrial equipment installs and setup.Perform demolitions, new installations, modifications, and repairs of electrical systems.Install and run conduit, wiring, disconnects, switches, panels, breakers, suppressors, and transformers.Troubleshoot PLC sensors and related components.Diagnose and resolve electrical issues across equipment.

Long-term data center project in Ellendale, ND.Must be licensed in the state of ND or have the ability to reciprocate (Alaska, Arkansas, Colorado, Idaho, Iowa, Maine, Minnesota, Montana, Nebraska, New Hampshire, South Dakota, Utah, and Wyoming)Experience Requested:Install, bend, and run EMT & Rigid conduitPerform wire pulls, terminations, and panel installsWork on switchgear, MCCs, transformers, and motor controlsRead and execute from prints and schematicsTroubleshoot and test electrical systemsDuration: 1–2 yearsSchedule: Current schedule is 5 days, with optional Saturday/Sunday

Seeking Licensed Journeyman Electricians for a long-term data center project in Fairfax, IA. $1,000 sign-on bonus.Schedule: Monday–Saturday, some Sundays. 58–72 hours/week. Per diem $125/day paid all 7 days.Experience Requested:Install raceways, conduit, and cable traysTerminate motors and motor controlsPull wire and cableInstall and terminate transformers, buss duct, switchgear, and motor control centersMaintain quality sign-off sheets and customer approval sheetsRead and interpret all applicable codes, drawings, schematics, sketches, and specifications related to assigned workComplete work safely and efficiently, while upholding quality requirements

Structural Welders/Fabricators needed for a production shop in Oxford, AL. Candidates will be required to Flux Core Gas Shielded with 1/16" wire. 2G, 3G, and 4G welding heavy K joints. There will be back gouging, so must know how to run a carbon arc gouger as well. Grind and fabricate to meet specifications. Must know how to read blueprints. This job lasts 2 months or longer depending on workload.Schedule: 1st shift — Monday–Friday 4:00 AM–5:00 PM; Saturday 4:00 AM–12:00 PM. Approximately 68 hours/week.

Project will last 5 days. Welders will be using 70/18 rod stick welding working on rail cars in an industrial setting.Schedule: Monday–Friday, 50 hours/week.

Tradesmen International is immediately hiring experienced Journeyman Plumbers for a project located in Brush, CO. This is a full-time opportunity with a pay range of $30–$50/hour based on experience plus $100/day per diem for travelers 60+ miles from the job site. If you are a Plumber and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career!Job Scope:Demolition workRough insFinish workOther tasks as assignedBenefits:Tradesmen+ Rewards Program (earn points redeemable for rewards based on hours worked)Vacation payHealth insurance401(k) retirement savings plan

Tradesmen International is currently hiring experienced Welders for projects located in and around Buffalo, NY. This is a full-time opportunity with a pay range of up to $42/hour based on experience plus $125/day per diem for travelers 60+ miles from the job site. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: Material handling Welding prep Metallic arc, TIG & MIG welding for carbon steel, steel to carbon & stainless to stainless. Other tasks as assigned Benefits: Tradesmen+ Rewards Program – earn points for hours worked Vacation Pay Health insurance 401(k) retirement savings plan

Position SummaryPlan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.Experience LevelIntermediatePrimary Responsibilities and DutiesInterprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problemsMeasures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminationsInstalls control and distribution apparatus’ and fastens in placeTest and start up systems and continuity of circuit to insure electrical compatibility and safety of componentsObserves functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacementMay be required to pull wire through conduit; connect wiring to lighting fixtures and power equipmentWork with high and low voltage systemsDisassembles and repairs defective electrical equipment or systemsOperate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical toolsQualificationsMay require a high school diploma or its equivalent with previous years of experience in the field or in a related area.Must possess working knowledge skills and abilities for position.Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.Ability to use hand tools, power tools and layout tools safe and efficiently.RequirementsThe person in this position needs to constantly move about a construction/industrial site, so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawlConstantly works in a construction environment and will be exposed to changing outdoor weather conditionsWork irregular hours, weekends, overtime and holidays as requiredMay be required to use ladders/mechanical platforms/manlifts/scaffold to access required equipment/work areas (may exceed 200 feet), so must be able to climb and maintain balance on formwork, steel formwork, stairs, ladders and scaffoldsMove and work in and around confined and cluttered places, and uneven surfacesMust be able to complete tasks in a noisy and dusty environmentMay be required/able to move items weighing up to 50 pounds across construction/industrial siteMust have required toolsMay require U.S. Driver LicenseObserve and comply with all safety and project rules, perform other duties as requiredAbility to pass pre-access drug and alcohol testing

FTE Position: $115,000–$135,000 | Per diem available for travelers (~$178/week) | Vehicle allowance available Bring complex mechanical projects across the finish line as a Start-Up and Commissioning Leader, where your expertise directly impacts project success, client satisfaction, and operational excellence. In this role, you will own the critical closeout phase of mechanical construction by planning and coordinating start-up, commissioning, and final turnover while ensuring projects are delivered on schedule, on budget, and to the highest technical standards. You will work hands-on with project managers, superintendents, subcontractors, vendors, and owners' commissioning agents, serving as the technical authority who solves problems, drives accountability, and maintains momentum through the most visible phase of the project. If you thrive in high-impact roles that combine leadership, deep technical knowledge, and autonomy and want to be the person who ensures systems perform exactly as designed, this is an opportunity to leave a lasting mark on every project you support. Position Summary Plan, direct, and coordinate the activities involved in the closeout of mechanical construction projects. Ensure that project goals are achieved in a timely manner and within budget, either by personally performing duties or through the supervision of subordinate team members. Manage the start-up and commissioning schedule, coordinating closely with project teams and subcontractors to facilitate activities related to start-up, commissioning, and overall project closeout. Role Responsibilities Review and comprehending project contract documents. Support project managers in maintaining equipment tracking and start-up matrix. Supervise and schedule the start-up of all mechanical and plumbing equipment. Manage and schedule start-up foremen and superintendents. Conduct troubleshooting and forensic investigations of construction-related issues. Collaborate with project teams to uphold the project schedule from start-up to closeout. Interface directly with mechanical equipment vendors for vendor-designated start-ups. Collaborate closely with and assist the owner's commissioning agent. Provide technical support and assistance in addressing commissioning issues. Maintain schedule and manpower projections related to start-up activities. Oversee and document installation verification and pre-functional testing. Work with temperature controls subcontractors and test and balance subcontractors throughout the commissioning phase. Coordinate and manage project team activities to assist with smoke control testing.

Compensation: $110,000–$150,000 (based on experience) | Per diem available for travelers (~$178/week) | Vehicle allowance available Looking to lead high-impact projects with a top-tier Mechanical team? We're hiring a Senior Project Manager to drive complex mechanical builds from concept to completion. If you're a proven leader with strong field experience, budget savvy, and a passion for collaboration, this is your chance to shape the future of construction. Join a team that values innovation, safety, and growth. Position Summary Manage and supervise day-to-day operations of staff teams on assigned projects. Initiate, review and oversee required project administration and documentation to avoid claims and protect the best interest of RK Mechanical, Inc. and our client. Ensure contract agreements are expeditiously secured, reviewed, processed and executed. Review, edit, finalize and distribute project budget. Conduct pre-construction turnover meetings for all assigned projects. Ensure required permits and/or licenses are obtained and posted. Initiate setup, monitoring and updating of project scheduling. Coordinate required procurement of materials and equipment with purchasing agent, with emphasis on buyout plan to meet, or improve on, established schedule dates and budget cost. Subcontract agreement negotiation, preparation, processing and execution. Ensure required submittal review, processing and approvals, and submittal logs are set-up and maintained. Develop, submit and obtain approval of billing schedule of values. Maintain an over billed cash position, and request retention release bill-down/payments. Collect payments, progress billing and retention receivables, on or before due dates. Price, negotiate and process change condition and change order work. Ensure assigned projects are properly staffed with appropriate field forces. This includes: 1) review, updating and approval of labor resource loading; and, 2) labor productivity. Oversee tools and rental equipment use on all assigned projects. Ensure that any tools and rental equipment not required, or not being utilized, are returned immediately. Responsible for overall financial performance of all assigned projects, including continual cost control, management and forecasting. Prepare accurately, and submit on time, all required project monthly contract valuations. Review, approve and process all subcontractor and supplier invoices. Attend monthly project management meeting and respond to any questions associated with assigned projects. Conduct regularly scheduled project staff meetings. Role Responsibilities Train and develop a high-performance Operations team. Provides leadership for safety and team culture of operations team. Provide the direction to create operations processes and procedures. Implement project management programs including policies, practices, procedures, systems, and documentation. Provides management of project accounting, project cost and trend reports, work-in-progress, productivity reporting, and monthly forecasts in conjunction with the business unit leadership. Review and monitor the project management team preparation and setup of budgets, billings and change orders. Manages and coordinates with subcontractors and suppliers. Coordinate timely completion of procurement procedures in conjunction with the purchasing team. Coordinate ordering, processing, and delivery of materials and equipment with vendors and central procurement personnel. Responsible for initiating, overseeing, and verifying billings to maintain over-billed and over-cash positions. Ensure turnover and pre-production planning meetings are conducted. Ensure prompt review and processing of purchase orders, contracts and subcontract agreements. Maintain exceptional owner, customer, engineer and vendor relationships. Continuously improve procedures, productivity and efficiency utilizing input from the team members. Support Account Executives with technical support and budget review. Work with CAD/VDC personnel for project needs. Manage projects through multi-discipline shop fabrication process. Coordinate production strategies with operations management and production teams. Has deep multi-disciplined experience in Project Management, Product Management, and Integration. Leader with exceptional attention to detail, communication, administrative skills and work ethic. Results orientated with ability to plan and deliver against deadlines. Experience in a fast-paced hands-on business environment with responsibility for a team. Ability to negotiate critical and controversial issues with Company leadership. Ability to make authoritative decisions and recommendations having significant impact on the Company. Demonstrates a high degree of creativity, foresight, and mature judgment in planning, organizing and guiding extensive programs and activities of importance. Experience with ERP and project management systems; including Viewpoint, Bluebeam and CAD/VDC systems.

FTE Position: $100,000–$120,000 | Per diem available for travelers (~$178/week) | Vehicle allowance available Mechanical Project Engineer is a vital contributor to the success of our construction projects, serving as the technical backbone for planning, coordination, and execution. From reviewing drawings and managing RFIs to supporting submittals, procurement, and quality control, this role ensures every system is designed and delivered with precision. You'll work closely with Project Managers, Superintendents, and field teams to resolve technical challenges, coordinate with design teams, and keep projects aligned with schedule and budget. This role is ideal for an engineer who thrives in a fast-paced environment and is eager to apply both critical thinking and mechanical expertise in the field. Mechanical Project Engineers are valued for their problem-solving ability, communication skills, and attention to detail. Their work supports seamless collaboration between design and construction, helping bring complex systems to life safely, efficiently, and to the highest standard. Position Summary Plan, direct and coordinate activities of designated mechanical, miscellaneous metals, or structural steel construction projects. Make sure goals are achieved in a timely manner and within budget by performing duties personally or through subordinate supervisors. Manage budgeting and scheduling. Administer contracts, buyout, documentation, meetings, billings, change conditions, labor productivity, cost control and project closeout. Role Responsibilities Manage and supervise day-to-day operations of staff teams on assigned projects. Initiate, review, and oversee required project administration and documentation to avoid claims and protect the best interest of RK Mechanical, Inc. and our client. Ensure contract agreements are expeditiously secured, reviewed, processed, and executed. Review, edit, finalize and distribute project budget. Conduct pre-construction turnover meetings for all assigned projects. Ensure required permits and/or licenses are obtained and posted. Initiate setup, monitoring and updating of project scheduling. Coordinate required procurement of materials and equipment with purchasing agent, with emphasis on buyout plan to meet, or improve on, established schedule dates and budget cost. Subcontract agreement negotiation, preparation, processing, and execution. Ensure required submittal review, processing and approvals, and submittal logs are set-up and maintained. Develop, submit and obtain approval of billing schedule of values. Maintain an over billed cash position, and request retention release bill-down/payments. Collect payments, progress billing and retention receivables, on or before due dates. Price, negotiate and process change condition and change order work. Ensure assigned projects are properly staffed with appropriate field forces. This includes: 1) review, updating and approval of labor resource loading; and 2) labor productivity. Oversee tools and rental equipment use on all assigned projects. Ensure that any tools and rental equipment not required, or not being utilized, are returned immediately. Responsible for overall financial performance of all assigned projects, including continual cost control, management, and forecasting. Prepare accurately, and submit on time, all required project monthly contract valuations. Review, approve and process all subcontractor and supplier invoices.

Schedule: 60 hours/week | Per Diem: $100/dayWe are currently seeking experienced Electricians for a federal construction project in Waynesboro, VA. Candidates must have solid commercial experience and be able to work independently in a professional job site environment.Qualified applicants must be proficient in running EMT conduit, installing and assembling cable tray systems, and performing clean, accurate terminations. Ability to read blueprints and follow project specifications is expected.This is a federal project, and all candidates must be authorized to work in the United States. Proper documentation will be required prior to starting.All workers must provide their own standard PPE, including hard hat, safety glasses, gloves, and steel-toe boots.We are looking for dependable, safety-oriented electricians who take pride in their workmanship and can maintain productivity while meeting job site standards.